Kinetic Robot hardware setup

Question

Would this be a good setup? Im mostly interested on the MB/CPU/PSU and battery

MB: www.newegg.com/Product/Product.aspx?Item=N82E16813186211

CPU: www.newegg.com/Product/Product.aspx?Item=N82E16819115078

PSU: www.logicsupply.com/products/picopsu_160

Battery: www.batterymart.com/p-12v-7ah-sealed-lead-acid-battery.html

Case: www.dfrobot.com/index.php?route=product/product&path=37_111&product_id=63#.UMlFRbT3BT5

Also i'll be using a Arduino/Arbotix and a motor controller for controlling motors, and servos.

Anything i should change? or look into?

Edit: I want to build a robot, that will create a map of its location using the kinetic, also i want to add 1-2 hands to it, that he can use to grab objects and open doors... Hands will use servos.

---

Originally posted by SuperMiguel on ROS Answers with karma: 56 on 2012-12-14

Post score: 0

---

Original comments

Comment by Lorenz on 2012-12-14:
Please tag your question and be more specific. What do you want to achieve. Make sure you have a look at the support guidelines.

Comment by SuperMiguel on 2012-12-14:
Updated question

Comment by SuperMiguel on 2012-12-14:
Updated question again

Answer 1

Your question is still vague. But you are missing a way to do some I/O and a motor-controller. Look in to the ros serial package and get an arduino (for instance) and a big motor controller.

---

Originally posted by davinci with karma: 2573 on 2012-12-14

This answer was ACCEPTED on the original site

Post score: 0