Timeline for Multiple Stepper Synchronization with updating position control at specified speed
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 4 at 19:33 | comment | added | dwpessoa | Have you tried searching for "corner rounding"? I had a similar problem, but I noticed that it varies greatly depending on the CNC, some in axis parameters, others in G code. Here is a solution for Schneider CNC (Codesys), I hope it helps you. | |
| S May 24, 2022 at 12:07 | history | suggested | jsotola | CC BY-SA 4.0 |
formatted code
|
| May 23, 2022 at 20:25 | review | Suggested edits | |||
| S May 24, 2022 at 12:07 | |||||
| May 23, 2022 at 5:21 | comment | added | Harsh Dobariya | Yes of course. But we can have smooth curved path optimized before hand. And it will be fed to the controller. Also we can have an input for continuous and non-continuous move. Where in continuous movement will not decelerate and approach current target with constant speed. While non-continuous move will decelerate to current target, stops and moves on to next target ramping up the speed. Just like what happens in KUKA, FANUC controller or Marlin and GRBL. | |
| May 23, 2022 at 5:11 | history | edited | Harsh Dobariya | CC BY-SA 4.0 |
added 26 characters in body
|
| May 23, 2022 at 0:18 | comment | added | jsotola | you cannot change direction without decelerating in one direction and accelerating in another direction | |
| S May 22, 2022 at 15:47 | review | First questions | |||
| May 22, 2022 at 23:03 | |||||
| S May 22, 2022 at 15:47 | history | asked | Harsh Dobariya | CC BY-SA 4.0 |