Timeline for What is the best way to attach a 3D printed part to a servo for robotics use?
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 21, 2016 at 16:15 | vote | accept | HlfShell | ||
| Feb 14, 2016 at 15:08 | comment | added | MechanicalMan | Nylon should be tougher, but know that it may still not be tough enough depending on the usage. If you find that Nylon still isn't enough, a rapid proto service would be no more difficult to call upon from a city apartment than Amazon would be. | |
| Feb 14, 2016 at 4:05 | vote | accept | HlfShell | ||
| Feb 14, 2016 at 4:05 | |||||
| Feb 14, 2016 at 3:01 | comment | added | HlfShell | Spot on - this is a standard hobby grade FDM printer. I'm printing out servo horn attachments now and I'll try that route. I was hoping to avoid requiring metal but you might be right about it. I live in a city apartment so am limited on some material selection. I will also try the same design in nylon - I hear that is quite a bit tougher, but I'm to date inexperienced with it so I'm hoping that it isn't too hard to work with. | |
| Feb 14, 2016 at 2:50 | history | answered | MechanicalMan | CC BY-SA 3.0 |