Skip to main content
Robotics

Return to Question

Added link to Shopbot site for context
Source Link
edit approved Jan 24, 2020 at 14:15
sempaiscuba
edit approved Jan 24, 2020 at 14:15
sempaiscuba
  • 1.1k
  • 3
  • 13
  • 25

We just bought a ShopBotShopBot for our Workshop and set it up ourselves. The ShopBot Software crashed every time we manually moved the gantry past its magnetic limit switches. Sometimes the software also crashed during a standard X-Y-Zeroing procedure. The machine has both limit switches and hard-stops installed that prevent the gantry from rolling off the rails after passing the limit switch.

Have any of you experienced a similar problem? How can we fix this?

We just bought a ShopBot for our Workshop and set it up ourselves. The ShopBot Software crashed every time we manually moved the gantry past its magnetic limit switches. Sometimes the software also crashed during a standard X-Y-Zeroing procedure. The machine has both limit switches and hard-stops installed that prevent the gantry from rolling off the rails after passing the limit switch.

Have any of you experienced a similar problem? How can we fix this?

We just bought a ShopBot for our Workshop and set it up ourselves. The ShopBot Software crashed every time we manually moved the gantry past its magnetic limit switches. Sometimes the software also crashed during a standard X-Y-Zeroing procedure. The machine has both limit switches and hard-stops installed that prevent the gantry from rolling off the rails after passing the limit switch.

Have any of you experienced a similar problem? How can we fix this?

Source Link
avgJoe
avgJoe
  • 103
  • 3

ShopBot router software crashes after machine moves past limit switch

We just bought a ShopBot for our Workshop and set it up ourselves. The ShopBot Software crashed every time we manually moved the gantry past its magnetic limit switches. Sometimes the software also crashed during a standard X-Y-Zeroing procedure. The machine has both limit switches and hard-stops installed that prevent the gantry from rolling off the rails after passing the limit switch.

Have any of you experienced a similar problem? How can we fix this?