I have an ABB IRB 1200 robotic arm that I'm controlling with MoveIt in ROS Noetic.

Using move_group.set_pose_target(pose), I'm getting weird inefficient motions sometimes.
Using move_group.set_joint_value_target(pose,True), I'm NOT getting weird motions.

However, obstacle avoidance is only supported using set_pose_target(), because it plans in cartesian space.

How can I get the best of both worlds, ie. efficient motions and obstacle avoidance?


### I tried:

 - increasing planning attempts: move_group.set_num_planning_attempts(20)
   - didnt work
 - increase tollerance: move_group.set_goal_tolerance(0.01)
   - weird motions occurred less often.

###  I'm using the Trac solver:
```
 - kinematics_solver: trac_ik_kinematics_plugin/TRAC_IKKinematicsPlugin
 - kinematics_solver_search_resolution: 0.005
 - kinematics_solver_timeout: 0.005
 - solve_type: Distance
```

### And BiTRRT for path planning:
```
planner_configs:
 BiTRRT:
    type: geometric::BiTRRT
    range: 0.0 
    temp_change_factor: 0.1  
    init_temperature: 100  
    frountier_threshold: 0.0  
    frountier_node_ratio: 0.1  
    cost_threshold: 1e300  

manipulator:
  default_planner_config: BiTRRT
  planner_configs:
    - BiTRRT
    - etc
  projection_evaluator: joints(joint_1,joint_2)
  longest_valid_segment_fraction: 0.005
```