# Questions tagged [transforms]

The tag has no usage guidance.

11 questions
Filter by
Sorted by
Tagged with
59 views

### Compute path in absolute frame from sequence of measurements

I have a sequence of measurements $\{(x_i, y_i, \theta_i)\}_{i = 1 \:...\: N}$. Each of these represents the new pose of the robot seen from the previous pose, i.e. a measurement $(x', y', \theta')$ ...
47 views

### Absolute 2D pose from previous pose and measurement

I have a pose $\boldsymbol{x}_0 = (x, y, \theta)$ in an absolute frame, right-handed and centered in (0, 0, 0). I obtain a measurement $\boldsymbol{m} = (\Delta x, \Delta y, \Delta \theta)$ in the ...
63 views

### Understanding Twists as 3D Velocities

I am just learning about twists to represent 3D velocities (e.g. of a robot's end-effector), and I have two questions: 1) Wikipedia defines a twist as "an angular velocity around an axis and a linear ...
12 views

### Getting the new heading after a Transformation

Lets say I have 2d poses as such (angles in degrees): world_to_robot = {0, 4, 45} robot_to_object = {4, -4, -45} From a graph it would be easy to see that: world_to_object = {4, 8, theta}, what goes ...
24 views

### Transform Velocity data from sensor frame to world frame

I am new to Robotics and transformation topics. I need help in understanding and solving the below problem. I have data (surrounding obstacle position, orientation and velocity) which are in sensor ...
12 views

### Determining Base Configuration Tsb from End-Effector Configuration Tse for youbot

Hello there, hope you are doing great. Right now I am trying to control youbot to pick and cube and place it to a certain position, on simulation. However, I believe that the reference trajectory is ...
49 views

### Reference frame, vector

How do I specify the directions of a unit vector $X_n$ and $Y_n$ of a frame $\{n\}$ at an angle $θ$ relative to a frame $\{a\}$ in the form $$X_n=cosθX_a + sinθY_a$$ $$Y_n=-sinθX_a+cosθY_a$$ ? Can ...
56 views

### How to make two frames relative to each other

I have a Velodyne and camera that both have transformations specified relative to the origin of the robot. The original transformations were specified as yaw, roll, pitch, x, y, z. I wrote a script to ...
27 views

### Finding orientation of object in 3D space

Given the above constellation, I have to find the orientation of object B in the coordinate system of Object C. The objects A and B are fixed to a certain place and the object C can move in freely in ...