Questions tagged [stereo-vision]

stereo vision is the extraction of 3D information from digital images, such as obtained by a CCD camera.

Filter by
Sorted by
Tagged with
0
votes
1answer
28 views

ROS Publish Stereo Image From 2 USB Cameras

I have two monocular USB cameras and I want to use ROS to make it a stereo camera. I am having a hard time finding a ROS package that consumes 2 monocular camera image streams and publishes a depth ...
0
votes
0answers
47 views

Cheap global shutter cameras with external synchronization

Please recommend cameras for multi-camera setup satisfying the following conditions: Relatively cheap (up to 100$ per camera). Global shutter. No filters on lenses or pixels. Resolution of 1 MP or ...
0
votes
0answers
77 views

ROS2 Stereo View Fails And Stereo Image Proc Doesn't Show Anything

I have set up 2 Monocular Cameras as a stereo camera in ROS2. I successfully published the 2 rectified and calibrated images through the following formats: ...
1
vote
1answer
50 views

Use 2 Cameras as 1 Stereo Camera

I have one Picamera and one normal USB Webcam and would like to use them together as one stereo camera. Is this even possible as the 2 cameras aren't exactly the same? I would like to use them in ROS ...
1
vote
0answers
27 views

Ground based path generation from RGBD camera

How does one generate a trajectory for a ground vehicle using an RGBD camera? For a drone it's simpler since you're not constrained by having to move on the ground but it's not clear to me how ...
0
votes
0answers
8 views

Is there any way to know whether the disparity is negative without stereo rectification?

For one stereo camera, stereo calibration is performed to obtain intrinsic and extrinsic parameters during manufacturing. During the process of usage, intrinsic and extrinsic parameters may be changed,...
0
votes
1answer
39 views

Mono VIO vs. Stereo-Camera to recover Depth Information

I have a question. I have found some papers, where they use a Mono-VIO to recover depth of a scene. My question is: Suppose I have a robot arm and attach a mono-VIO system to it. Then I move this arm ...
2
votes
0answers
25 views

Choosing cameras for stereo vision system?

I'm in the process of building a stereo vision system with YOLO detection. The system have to detect airplanes in far distance and also measure the depth from the airplane to the camera. I think ...
0
votes
2answers
71 views

Trajectory planning in unstructured environments

How is trajectory planning normally carried out in off-road/unstructured environments? In particular I'm interested in how stereo vision can be used to plot trajectories over obstacles - for example, ...
0
votes
1answer
106 views

How can I calibrate 3 cameras without knowing global pose of the object & camera locations? How can I find the pose of each camera wrt the first one?

I have camera feed (in the form of RGB images) from 3 cameras with partially overlapping Field-of-view i.e. for the time stamp 0 to 100, I have total 300 frames or say synchronized 100 RGB frames for ...
1
vote
0answers
20 views

Size of smallest feature from pixel depth resolution

How do I get the size in mm of the smallest feature a depth camera can detect? Known variables are: distance from the target (for instance 1 meter), depth resolution in pixels (for instance 1280 x 720)...
1
vote
1answer
86 views

How is the depth estimation done in DTAM / LSD-SLAM (direct VSLAM)?

I know that DTAM and LSD-SLAM both employ the photometric error between two keyframes to estimate the image depth. But I don't know what the photometric error describes precisely. In the DTAM paper, I ...
0
votes
1answer
30 views

Number of pixel comparison needed to establish correspondence

I am reading the paper titled Variable Baseline/Resolution Stereo David Gallup, Jan-Michael Frahm, Philippos Mordohai, Marc Pollefeys Section 3 of the paper talks about the time complexity of the ...
3
votes
0answers
82 views

Assistance in finding correct LIDAR for short-range object detection task

I am working on a task that involves finding a distance of a moving object going a static linear object, e.g a long pole. After trying some approaches (mostly involving stereo vision), I have come up ...
1
vote
0answers
19 views

Triangulation in Stereo-Vision?

I need some help in 3D Positioning system I'm trying to set up. At the moment I am using 2 Calibrated cameras, my strategy is to place an AR Marker on the scene, identify the position of the AR Marker ...
21
votes
4answers
14k views

How to select cameras for a stereo vision system?

I am in the process of building a stereo vision system to be used on a UGV. The system is for a robot that will be used in a competition wherein the robot is teleoperated to find relatively small ...
2
votes
1answer
30 views

Active Light Stereopsis: 1 Camera + Projector Vs. 2 Camera + Projector

What is the difference between using 1 Camera and a Projector and using 2 Cameras and a Projector for creating structure from motion? Is it that if we use only 1 camera and a projector then we will ...
0
votes
1answer
28 views

Tracking 3D motion using a stereo camera

Assuming you have a fixed stereo camera, looking at a rigid object, what are the techniques used to track the object? My google searches lead me to optical flow and similar algorithms, but I believe ...
0
votes
0answers
19 views

Single Camera + Laser Projector Triangulation

I want to combine a laser line projector (projects a laser plane) and a single web camera to determine the X, Y, Z position of the laser point. I am slightly confused as to how to use the fact that we ...
2
votes
0answers
28 views

Disparity error in active light stereo systems?

Based on this relationship, if we have to estimate the 'disparity error' of a stereo system which uses active light on the scene - can we estimate the disparity error to be very small? According to ...
3
votes
1answer
240 views

Short range stereo vision

I am designing a stereo vision system for short depth range (15 cm to 35 cm) and I have some problems about baseline, focal length and depth range. My application is to scan an animal tissue (meat, ...
2
votes
2answers
518 views

How does structured light improve accuracy in stereo vision?

In my understanding, in order to improve accuracy for the estimation of depth with a stereo vision camera, patterns of light are projected into the scene, because the resulting texture makes it easier ...
0
votes
1answer
94 views

disparity error to x and y accuracy

This question talks about the depth error ($\Delta$Z) as a function of disparity error ($\Delta$D). I want to do the same for X and ...
5
votes
2answers
6k views

Estimate Disparity Error for Depth Accuracy Estimation

I would like to get a rough estimate of the depth accuracy / uncertainty of a stereo camera system. For this I would like to use the basic formula in the attached image. What is still unclear to me is ...
0
votes
1answer
52 views

Questions about customized stereo camera

I am designing my robot and I have quite design issues with the available stereo cameras on a market. For the prototype I am using ZED M but it is too expensive and quite large. The question is, do ...
1
vote
0answers
40 views

Stereo-Calibration with Variable focal cameras

Is it possible to perform stereo-calibration with cameras having variable focus? and if so, how is it done basically?
2
votes
0answers
73 views

Stereo Rectification when Extrinsics are known

Suppose I have two cameras $C_1$ and $C_2$ arranged in a stereo configuration. Let us assume that the camera is free of distortion with ideal intrinsics and that the camera extrinsics $R$ and $t$ are ...
1
vote
0answers
55 views

Tracking object in realtime using depth image stream from a RGBD camera

I have an Intel RealSense camera which can stream RGB and depth image. Using those information I want to track an object moving on a table top. More specifically, I want to know position $(x,y)$ and ...
3
votes
1answer
144 views

Setting up a Structured Light Stereo system

I am trying to get started with a stereo experiment and wanted to know the mistakes I might have made during the experiment. The goal is to calculate the depth map of an object using one light ...
6
votes
3answers
13k views

Hand Eye Calibration

I'm trying to use a dual quaternion Hand Eye Calibration Algorithm Header and Implementation, and I'm getting values that are way off. I'm using a robot arm and an optical tracker, aka camera, plus a ...
3
votes
1answer
871 views

Trigger two usb cameras at the same time

I'm studyng stereo cameras, and I want to build one. I searched a lot in internet, and the opinions are quite different about this topic. Basically, my question is: Can I synchronize two usb ...
4
votes
2answers
138 views

Why are two cameras mounted in paralle in stereo application?

For stereo cameras on the market, two cameras are always mounted side by side and with a displacement that is perpendicular to the cameras’ optical axes. I take this setup for granted. One idea came ...
5
votes
2answers
7k views

How can I improve ZED Camera precision? [closed]

I'm using Stereolabs ZED camera for my computer vision project. I did a small research about several sensors on the market and ultimately we decided to go with the ZED Camera. However I'm finding ...
4
votes
2answers
5k views

Depth accuracy of the stereo camera

I am doing a project on calibrating stereo ZED camera and finding its accuracy and compare with the Manufacturer's accuracy of 1% at 1m depth accuracy. For this purpose , the formula to calculate the ...
4
votes
4answers
1k views

Which micro-controler/processor to be used for autonomous stereo vision robot system?

I am very new two robotics, however I have a working stereo algorithm which I want to combine with a SLAM algorithm. I am developing this system for an other application but I decided integrating it ...
4
votes
2answers
1k views

Stereo Camera calibration with different camera types

I'm trying to perform stereo camera calibration, rectification and disparity map generation. It's working fine with normal sample data. However, I'm trying to use the dual cameras on an iPhone 7+, ...
1
vote
0answers
200 views

Stereo vision setup to obtain depth map

I am currently working on a project that requires me to obtain depth information and point cloud map of objects in an indoor environment ( roughly twice the size of a normal room). I would like to ...
2
votes
1answer
133 views

Once matching features are computed between a stereo pair, how can they be tracked?

I am currently working on a SLAM-like application using a variable baseline stereo rig. Assuming I'm trying to perform visual SLAM using a stereo camera, my initialization routine would involve ...
1
vote
2answers
181 views

Depth sensing for a pick-and-place robot

I am supposed to design a pick-and-place robot. I have a prismatic joint to go down to a particular depth to pick an object which is located in 2D using computer vision. What is the recommended way to ...
5
votes
2answers
6k views

Camera selection for long range stereo vision system (up to 100 meters)

I want to implement a real-time stereo vision system for long range (up to 100m) depth estimation. I know that there are some general considerations as described in this SOV post. I have seen some ...
1
vote
0answers
114 views

Camera calibration sequence with ground truth data

I'm looking for a SLAM dataset (monocular or stereo) specifically with a checkerboard, meaning the camera always has a checkerboard in frame. Most popular datasets provide calibration sequences, ...
1
vote
0answers
84 views

Accuracy of stereovision camera

I want to use stereovision to get 3D coordinates of a point in the camera's frame. Let's say, I can zoom in and click in the image to select my point of interest. I want an accuracy of about 0.05 - 0....
2
votes
0answers
75 views

Effectiveness of visual odometry algorithms (CPU usage)

My robot needs to obtain visual odometry, with a condition that the used algorithm has to have as low computational requirements as possible and the used camera/sensor shouldn't be very expensive. The ...
1
vote
1answer
543 views

Forward monocular stereo vision (Structure from Motion)

I am looking for a library (or algorithm) that computes 3D scene (point cloud) from 2 consecutive images of a monocular sequence. I mean something like OpenSfM but only for 2 consecutive frames and ...
2
votes
1answer
62 views

Correct calibration parameters of stereo system due to vibrations

In stereo vision, the camera is calibrated using the popular chessboard before use. During the course of use, the camera maybe be subject to environmental factors such as vibrations.This may cause ...
0
votes
1answer
345 views

setup requirement of stereo camera

In the stereo camera system, two cameras are needed and should be mounted side by side. I see someone just glues two cameras to a wooden board. However one mobile phone manufacture claimed that the ...
2
votes
2answers
404 views

Using Standard Digital camera for Computer Vision

For a University project I have to use computer vision to detect small drones within 40 feet. I know there exists a pixycam for this purpose, but I was not happy with it, when I used it for CV. I ...
2
votes
1answer
54 views

Is there a better way to deal with untextured regions in stereo matching

Texture is very helpful for stereo matching. However in real environment, untextured areas always exit. Consistent semi-global matching is proposed to deal with untextured regions. I start to read the ...
0
votes
1answer
468 views

Effect of camera misalignment errors in dual cameras

In the camera module assembly process, parameters of camera modules vary due to manufacturing tolerance. Camera calibration is performed to obtain actual parameters. In the paper Effects of camera ...
4
votes
2answers
1k views

Interfacing high-resolution image sensors with ARM Board [closed]

I'm working on a project requiring HD (Stereo) Video Processing. Most of High Resolution (5MP+) Sensors use MIPI-CSI interface. I managed to get a board with an Exynos5 SoC. The SoC Itself has 2 ...