Questions tagged [rotation]

The tag has no usage guidance.

17 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
3
votes
2answers
1k views

Finding correct RPY for approaching a known point on a plane

I have a robot with 6 DOF that I want to use to grab a hanging sheet at a specific point near its edge. The grip needs to be perpendicular to the edge and co-planar with the point of course. I have ...
3
votes
1answer
312 views

Rotation composition When using Kalman Filter

I am implementing a Kalman Filter for the following situation. I have a camera set in a room that can detect the position and orientation of a marker (ARUCO) in the room. Therefore I have the ...
2
votes
0answers
18 views

Undo pitching effect of camera when pose (y-axis) is near 90 degrees?

I am using KITTI odometry dataset whereby the camera's axis is pointing X (east), Y (down) and Z (north). It also contain the frame to frame poses of the camera (first pose is fixed as the map frame). ...
1
vote
0answers
52 views

Rotate while strafing with mecanum wheels

I have a robot with a drivetrain that is comprised of 4 mecanum wheels. These wheels are able to move vertically and horizontally, as well as rotate. The robot is square (18in x 18in) with the front 2 ...
1
vote
0answers
17 views

What could cause quaternion error to go up drastically when a gyroscope is rotated on more than one axis at a time?

Alright, I'm working on a small Arduino script that determines orientation using a a gyroscope and a quaternion. My hardware: LSM9DS1 IMU (Gyroscope, Accelerometer, Magnetometer) Teensy 4.0 My basic ...
1
vote
1answer
69 views

Reset coordinate system of robot while maintaining relationship to the previous

I am currently estimating a robot's pose (3d position and rotation matrix) with an IMU and I want to reset the localizer in the middle of the run while keeping the relationship to the pose it had when ...
1
vote
0answers
31 views

Moment of Inertia of a planar rotation link with a 6-DOF base

I'm interested in analytic calculation of a moment of inertia of a robot's arm in the following situation. Let us assume the following: Stationary reference frame $ \{b\} = \{X_B, Y_B, Z_B\}$ and ...
1
vote
0answers
109 views

How to get RPY(Roll, Pitch, Yaw) from directional cosines from a single vector?

I'm trying to find the pose of an 3D vector in terms of RPY. Let's say the two end points of the vector is P0(x0, y0, z0) and P1(x1, y1, z1). So the centered vector I get is V(Vx, Vy, Vz) = P1 - P0 = (...
0
votes
0answers
21 views

How to compute linear speed on scooter without gps and wheel odometry

My project is to be able to compute my linear speed on my scooter only with my IMU. I have a IMU build with my arduino which is in my backpack. I want first to compensate the acceleration measurement ...
0
votes
1answer
56 views

How to make two frames relative to each other

I have a Velodyne and camera that both have transformations specified relative to the origin of the robot. The original transformations were specified as yaw, roll, pitch, x, y, z. I wrote a script to ...
0
votes
0answers
30 views

Angular movement of a controlled arm relative to an object via Two IMUs

I've been tasked to use two YEI 3-space sensors (IMUs) to detect the azimuth and elevation (altitude in the image below) angle of a moving arm with respect to a fixed object, with a sensor on the end ...
0
votes
0answers
24 views

2-axis inclinometer angles to quaterion angles

How to derive quaterion angles (3 angles of the rotation vector with respect to the inertial coordinate frame and the rotation angle around that vector) knowing X and Y angles from a 2-axis ...
0
votes
0answers
21 views

Convert point coordinates from inclined to inertial coordinate system using inclinometer angles

I have a point (red dot) coordinates given as [vector magnitude, azimuth angle (blue), elevation angle (yellow)] in the inclined local system X'Y'Z', which must be converted into coordinates [x, y, z] ...
0
votes
1answer
113 views

What is my last rotation matrix for the last three angles when i have found the first three when doing inverse kinematics to a 6dof robot?

I am doing inverse kinematics for a 6dof robot. I have used the geometrical method to describe the angles from one to three. I have trouble doing the next part. I know I that I have found the ...
0
votes
0answers
51 views

What's the result of multiplying a rotation matrix having only ψ components by another which has (−φ,θ,−ψ) components?

Given the following rotation matrix: $ R(φ, θ, ψ) = \left( \begin{smallmatrix} cos(θ)*cos(ψ) & -sin(φ)*sin(θ)*cos(ψ)-cos(φ)*sin(ψ) & -cos(φ)*sin(θ)*cos(ψ)+sin(φ)*sin(ψ) \\ ...
0
votes
0answers
27 views

MPU6050 Gyro rotaion always around Y axis

I am using an MPU6050 IMU. I did a small experiment having Z-axis pointing upwards. 1. Rotate 90deg around Z-axis (yaw) and back to the original position 2. Rotate 90deg around X-axis (roll) and back ...
0
votes
1answer
2k views

Rotating NED to ENU

I have an IMU in NED of which I need to rotate to ENU to conform with ROS. I know its a roll of pi and a yaw of pi/2 but what ...