Questions tagged [rotation]

The tag has no usage guidance.

78 questions
Filter by
Sorted by
Tagged with
26 views

Can the tangent space vector of SO3 be interpreted as Euler angles?

I want to compare the rotation of two cameras with respect to a common frame. Let's call these R_World_Cam0 and R_World_Cam1. ...
22 views

How to compute linear speed on scooter without gps and wheel odometry

My project is to be able to compute my linear speed on my scooter only with my IMU. I have a IMU build with my arduino which is in my backpack. I want first to compensate the acceleration measurement ...
53 views

What type of electric motor and speed-controlled circuit do I use to bounce a hanging, 5 pound weight? (it's for a Halloween decoration)

I'm trying to make a roughly 5 pound, hanging halloween decoration bounce on a string from about 1-3 times per second, preferably at variable speeds if I can. I've looked up a simple DC motor circuit ...
50 views

Inertial frame's angular velocity expression

I'm following a robotics course on coursera which talks about aerial robotics and more specifically quadrotors. I'm trying to understand the logic behind the relationship between the angular velocity ...
93 views

Calculating rotation matrix efficiently

I'm trying to efficiently calculate the vertical offset of each corner of a rectangular base. I have an accelerometer mounted in the middle of the base, ADXL345. The steps I have taken, and seems to ...
65 views

How to handle robot movement close to coordinates x=0 with atan2

I am working on controlling a robot to various points on an x,y grid. The robot starts at random locations and I can control it's velocity and angular velocity. Currently, I am using the technique of ...
89 views

How can I draw a line using rotation of two circles?

I’m building a drawbot with a self imposed constraint that it’s method of motion is just two rotating disks. One holding the paper and one holding the pen. However, the math to calculate the right ...
28 views

24 views

2-axis inclinometer angles to quaterion angles

How to derive quaterion angles (3 angles of the rotation vector with respect to the inertial coordinate frame and the rotation angle around that vector) knowing X and Y angles from a 2-axis ...
69 views

Reset coordinate system of robot while maintaining relationship to the previous

I am currently estimating a robot's pose (3d position and rotation matrix) with an IMU and I want to reset the localizer in the middle of the run while keeping the relationship to the pose it had when ...
22 views

Convert point coordinates from inclined to inertial coordinate system using inclinometer angles

I have a point (red dot) coordinates given as [vector magnitude, azimuth angle (blue), elevation angle (yellow)] in the inclined local system X'Y'Z', which must be converted into coordinates [x, y, z] ...
113 views

What is my last rotation matrix for the last three angles when i have found the first three when doing inverse kinematics to a 6dof robot?

I am doing inverse kinematics for a 6dof robot. I have used the geometrical method to describe the angles from one to three. I have trouble doing the next part. I know I that I have found the ...
33 views

Finding quaternion Q, where Y = q * X * q.inv()

Problem Quaternions $X$, $Y$, which represents 3-dimensional points are given. Quaternion $q$ is what is to be solved. I want to know unknown rotation between $X$ and $Y$. In other words, I want to ...
51 views

18 views

Undo pitching effect of camera when pose (y-axis) is near 90 degrees?

I am using KITTI odometry dataset whereby the camera's axis is pointing X (east), Y (down) and Z (north). It also contain the frame to frame poses of the camera (first pose is fixed as the map frame). ...
19 views

How should I create a Pangolin (Armadillo) structure?

I am new to this forum. I want to create a mechanical structure as depicted in the image A pangolin bag. And further wouls like to automate the closing and opening of the bag. But I am facing issues ...
357 views

Adjusting the PWM frequency and duty cycle to achieve the desired angular velocity in differential drive robots

I am practicing C++ and intro to robotics using a simple differential drive robot and a raspberry pi. Also following along the GA Tech course on control of mobile robotics. The implementation I am ...
1k views

Finding correct RPY for approaching a known point on a plane

I have a robot with 6 DOF that I want to use to grab a hanging sheet at a specific point near its edge. The grip needs to be perpendicular to the edge and co-planar with the point of course. I have ...
585 views

How can I attach an arm to a double-flat drive stepper motor?

This is my first robotics experience, outside of one class 10 years ago. I've been Googling this question for about an hour but I can't find an answer! I'm using a ROHS Step Motor 28BYJ-48 (with an ...
263 views

Forward Kinematics with matrices

From the image, I would like to find out how joint 1, 2 and 3 can be computed by using forward kinematics? (Assuming a theta value was given) I understand that to get point 3 to origin (...
2k views

Using pre multiply or post multipy for rotational matrix to get a new homogenous transformation matrix?

I am confused about how do I multiply the rotational matrix in this case. I know that both T1 and T2 needs to be multiplied by a rotational matrix but I don't know how to multiply the rotational ...
4k views

Why Euler Angle is set to be in ZYZ order?

We have 3 DOF for rotation in 3D space. So to describe an arbitrary rotation, we need to describe its 3 DOF. Euler angle does this by dividing a rotation in 3 steps, first rotate along the Z axis of ...
2k views

Get Yaw from quaternion

I found a formula online to extract yaw from a quaternion like so: ...