# Questions tagged [matlab]

MATLAB is a high-level language and interactive programming environment for numerical computation and visualization developed by MathWorks.

118 questions
27 views

### Yaw drift when implementing AHRS filter fusion

I am using the Matlab AHRS filter fusion algorithm with an InvenSense ICM-20948 to determine object orientation. I seem to be obtaining reasonable results however I am getting what appears to be ...
43 views

### Line following robot mathematic model

I'm trying to improve the speed my line following robot. I have made this chassis designs. This is the main prototype I'm working on. Look at the following image. I'm driving the robot with PID, and ...
13 views

After some research Robotic hand simulation in MatLab? After some motivation, I have tried to go inside Matlab Simulink and was able to do this :- https://drive.google.com/open?id=...
35 views

### Is system identification and a physics engine the same?

In the control theory the term “system identification” is used quite often. A typical sentence in a robotics oriented paper is that the author is trying to “build a model of a plant with matlab”. The ...
53 views

### Esc calibration

I want to make a calibration setup for BLDC ESC in the simulink model. I'm using arduino mega (3,9,10,11 pins) and quatro 30Ax4 esc. Normally I can set it to it's max, min, and incrementally increase/...
20 views

### Get a signal from position array data

I'm working with position data from a hand sensor, and need to apply an FFT to it to get the level of tremor based on the frequency of the signal. I get two arrays, one with +1000 frames of position ...
57 views

### Robotic hand simulation in MatLab?

We are doing graduation project and require simulation of the robotic hand to be submitted. And we want to control various parameter in for movement for fingers of robotic hand. We tried it in other ...
67 views

### Libraries to simulate path planning in a dynamic environment for a 2D space

I need to simulate a path planning approach for a 2D space where the obstacles are moving. Initially, I need to implement probabilistic road map, D* lite, A* and Bug2 algorithm. The robot needs to be ...
116 views

### Convert local coordinates of a moving IMU to global coordinates

I am trying to compare the performance of an IMU in motion against an optical tracking system. The IMU has an accelerometer and a gyroscope and gives output in the local IMU coordinate frames. The ...
40 views

### Image data fusion

I have three cameras separated by some distance, looking at a scene. I have calibrated them using checkerboard and I have their respective intrinsic parameters and their pose and rotation matrix, I am ...
11 views

### How can I import openmv camera feed in MATLAB

I am planning to use openmv camera with wifi shield for my project. I want to import the video feed to MATLAB for further processing. As per my preliminary search it is extremely difficult and ...
1k views

### RGB-D SLAM - Compute Information Matrix

currently im working on a RGB-D SLAM with a Kinect v1 Camera. In the front-end the SLAM estimates the pose with Ransac as an initial guess for the ICP. With the pose estimation i transform the ...
766 views

### Kuka KR16L-2 robot simulation base and wrist rotation inconsistent with original robot

The issue is regarding simulation of Kuka robot KR16L6-2 in MATLAB using Robotics toolkit by Peter Corke. I wish to simulate the kinematic before passing a command to real robot for motion. I have ...
556 views

### About official robotics system toolbox Matlab and Peter Corke Robotics toolbox matlab.

I came to know that matlab released robotics system toolbox in 2016 version but I'm using Matlab 2014b. At that time I installed Peter Corke Robotics toolbox matlab and start working on it. I develop ...
535 views

### Does simulink accepts robotics toolbox in matlab?

I'm trying to make a model for a robotic arm on simulink and then excute it on arduino controller but i want also to use robotics toolbox to calculate forward and inverse kinematics so i need to add ...
430 views

### inverse kinematics matlab RVC for 3 joint RRR

Hi im having problem with Inverse kinematic using RVC toolbox in matlab for RRR manipulator. ...
343 views

### Lego Mindstorms EV3 gyro sensor offset fix

I am currently working on a project for a Lego Mindstorms EV3 autopilot using Matlab/Simulink. Basically, I am using a closed loop control system with a PID controller for the control of the control ...
274 views

### Baxter and Robotics System Toolbox

I am trying to setup a two way communication with the Baxter Robot using the Robotics System Toolbox from MATLAB. However, I am unable to move the arms or record a trajectory using the rosactionclient ...
235 views

### Error in simmechanics matlab while doing inverse dynamics using custom joint

I am doing inverse dynamics in Matlab simmechanics in which position and orientation will be input to the end effector. But it shows error as below. Error originates in Mechanical block rob33/...
3k views

### How to create Matlab Simulation for Kinematics of Differential Drive

I studied the forward and inverse Kinematics of the robot and got a clear understanding. I am in the progress of developing my matlab simulation for a two wheeled differential drive robot. The robot ...
38 views

### how to introduce 2 inputs into a matlab block function that processes only one variable at a time? [closed]

Using SIMULINK, I wanted to optimize 2 variables with the ant colony optimization algorithm; which is written in a matlab function block, the function is of type function y = f (x) it has only one ...
61 views

### Forward Kinematics Frame Simulation in MATLAB

I've worked out the T matrix of the tip (position and orientation) with respect to the base frame of a 6 DoF robot for 2 seconds at 1kHz. So the size of the total T matrix is 4*4*1000. How can I ...
112 views

### Control system in Matlab with RSA encryption

I want to implement an encrypted controller in Matlab using RSA. I am trying to replicate what is written in this scheme from 'Cyber-Security Enhancement of Networked Control Systems Using Homomorphic ...
577 views

### How to apply A bang-bang signal of amplitude 1 N and 1 s width as an input force to reproduce certain results in Matlab?

I working on dynamic modeling and simulation of a mechanical system (overhead crane), after I obtained the equation of motion, in the form: $$M(q)\ddot{q}+C(q,\dot{q})\dot{q}+G(q)=Q$$ All the ...
115 views

### Inconsistent results between Simulink derivative model and tf for PD controller

I'm designing a PD controller so that the response due to unit step should exhibit an overshoot of 20% and steady-state error less 0.01. I've computed the parameters Kp and Kd and double-checked the ...
52 views

### RRT star Convergence

My Code gives the following convergence characteristics, I wanted to know if it is correct Updated code { ...
42 views

### Data Driven Modelling for Motor Position Control

I am trying to identify a plant model for a motor position control using MATLAB System identification toolbox. If it is a speed control example the data set can be generated easily. In this a case ...
68 views

### Meaning of a negative step response with quaternion

It's not technically robotics but: I've been trying to reproduce in Simulink a spacecraft attitude simulation using quaternions, and the kinematics and dynamics seem to work fine, however I'm having ...
199 views

### How can I get the right sample in RRT star Dubins?

I am trying to find a solution in S(1)*R^2 (x,y, orientation) with obstacles (refer to image) using RRT star and Dubins Model. The code takes a lot of time to find a suitable random sample with x,y, ...
220 views

I'm trying to develop a platoon leader follower formation for two robots in Matlab. The paper I'm trying to follow is this. I've got next code, where I want follower robot to follow the leader robot'...
82 views

### Getting position from joint angles in Matlab RigidBodyTree

I want to use matlab for estimating the position of end effector given joint angles. I saw convenient tool to build robot model using RigidBodyTree. My manipulator is planar, with only revolute joints ...
188 views

### Laser Scanner for localization in particle filter

I'm working on a particle filter implementation in Matlab and I found one very good in the Robotics Toolbox (available here https://github.com/petercorke/robotics-toolbox-matlab). My problem is that I ...
784 views

### Using Gazebo installed on same machine in MATLAB

I am planning to use MATLAB and Gazebo for one of my course projects. However all the tutorials I have seen till now use Gazebo by using a virtual machine which has ROS and Gazebo installed. I have ...
29 views

### Robotics Toolbox Error using tb_optparse Too many input arguments

I tired to run the RRT example that can be found on page 239 of robot.pdf that can be found here ...
103 views

### Matlab: Simulate received signals of sonar sensors

StackExchange community! I need the guidance what to use for the generation sensor data in Matlab. My purpose is to optimize the exploration process of unknown environment using the multi-robot ...
303 views

### Error when using Matlab Function block in Simechanics (nested functions and parsing of Matlab function both error)

I create a simple simulink model using Matlab Function block to calculate angles of 4 dof robotic arm using Robotic toolbox Matlab while input is x, y and z values. I used forward kinematics to ...
129 views

### How quickly can a driverless vehicle generate control commands?

Can anyone give me a typical frequency that a driverless vehicle could generate steering and motor thrust commands? I am trying to model a driverless vehicle in MatLab. Right now the vehicle is ...
46 views

### How can i convert Torque input into PWM signal?

I am working on a project in which i have a robot working with stepper motors. I wish to control this robot with simulink. How can i convert the input( Analog sin input ) into the PWM that can be used ...
382 views

### Inverse Kinematics 5DOF - general approach - Wrong solution MATLAB

Can anyone name a good source for a general approach (cookbook-like) for the inverse kinematics regarding a 5-DOF? The paper by De Xu et al. is aiming for a general approach, but it doesn't work for ...
502 views

### Inverse kinematic solution not giving the same forward kinematics answer

I'm working on an assignment where I need to derive IK for 5 DOF Youbot kuka robotic arm manipulatorofficial website. I'm using inverse kinematics decoupling and following a geometrical approach using ...
565 views

### Inverse kinematics showing incorrect results for 4 dof robot in MATLAB using Robotics Toolbox

I'm doing inverse kinematics for 4 dof robot using robotics toolbox matlab. The code is given below: ...
65 views

### How to round of these values to 0

How to shorten these values? They are the result of a matrix like this. When I individually run sin(theta1) and such functions, it would give me the correct value as a zero or a one (the angles I am ...
98 views

### Should the kalmanfilter have disturbance as input?

This is a kalmanfilter As you can see, the process noise(disturbance) is not going to the kalmanfilter. But the state space model for the state feedback system is written as this: https://youtu.be/...
2k views

### Determine the relative camera pose given two RGB camera frames in openCV-python

I would like to determine the relative camera pose given two RGB camera frames. I assume there's overlap in field of view between the two cameras, what I am looking for ultimately is the rotation and ...
370 views

### Control of WMR (Wheeled Mobile Robot) in 3D

I've implemented SMC (Sliding Mode Controller) on WMR in both X-Y and X-Z plane. Now i want to combine both of these to control WMR in 3D. For this purpose I'm trying to use resultant vector of ...
401 views

### Human arm inverse kinematics

Hi I want to implement an human arm robot and a task such as moving a glass between two points using Robotic Toolbox for Matlab by Peter Coorke. I'm a student and I'm a newbie in this kind of things ...
130 views

### Generation of a trajectory (position,velocity,acceleration) from velocity

I would like to generate a trajectory for a quadrotor UAV and I am using an architecture which allows to do so only by specifying position, velocity and acceleration. I only know that I want to do a ...
294 views

### Project ideas for Robot modeling

I am a 1st-year grad student majoring in robotics. I have the opportunity to select and execute my own projects for a course called Robot Modeling. For the project, I have decided to model a UR5 and ...
I have a closed-loop system with the following discrete-time plant: $P(z) = \frac{0.1262}{z^2-0.3303z+0.07517}$ With a fixed (and horrendously low) sampling time of 0.05 seconds. The plant has a ...