# Questions tagged [industrial-robot]

An industrial robot is a robot system used for manufacturing. Industrial robots are automated, programmable and capable of movement on two or more axes

98 questions
Filter by
Sorted by
Tagged with
437 views

### CNC stepper motors are loud and slow after decreasing the steps/mm from 250 to 5

I'm making a drawing robot and have hooked up my steppers to each axis. I'm using the grbl shield with arduino and nema 17 steppers. Initially the firmware was set at 250 steps/mm but with my setup ...
105 views

### What is my last rotation matrix for the last three angles when i have found the first three when doing inverse kinematics to a 6dof robot?

I am doing inverse kinematics for a 6dof robot. I have used the geometrical method to describe the angles from one to three. I have trouble doing the next part. I know I that I have found the ...
68 views

### Calculating seam length

I have an Arc welding RAPID program with many seams. One of them looks like this: ...
40 views

### What should be the required operating voltage for Servo motors in my 5 DOF robotic arm, with 50 kg payload

These are the estimated torque values of all axis in our applications 1st Axis- 226.57 oz-in - 478oz-in 2nd Axis- 756 oz-in -1590oz-in 3rd Axis- 356 oz-in - 749.7 oz-in 4th Axis- 188 oz-in - 395 oz-...
246 views

### Tool calibration- orientation

I'm currently working on calibration of robot tool. I have found some simple methods to get the tool centre point. But I'm sure how to get the tool orientation wrt the robot's tip (the point where the ...
68 views

### Compute orientation velocities 6-DOF robot

I am trying to compute the joint velocities a 6-DOF manipulator(a typical industrial robot). I have an initial position [xi, yi, zi, T1i, T2i, T3i] and goal position [xf, yf, zf, T1f, T2f, T3f] in the ...
63 views

### Multi-Link Robot Degrees of Freedom

I want to compute the DOF of this system if it composed of (n) such links grasping this common object using Grubler's formula obtaining the solution as a function of (n), considering this to be a ...
169 views

### Robotic arm servo motor- Not enough torque

I require your help regarding a problem Iām encountering. I am a beginner in robot modelling. I am designing a robotic arm for agricultural use and I am having issues with the motors. I am using ...
35 views

### Motion of a mobile platform inaccurate than industrial robot arm

It is known that with a 7DoF industrial you can achieve an accuracy of ~2mm. However, the motion with a mobile platform is known to be more inaccurate and expensive. I can follow why the motion is ...
4k views

### 12V compressor and air pressure control

I am trying to make a simple robot with few functionality for someone, one of these functionality is inflating a balloon inside the robot, I know how to control a compressor using Arduino but the ...
56 views

### Jacobian Derivative (Analytical?)

If I understand this correctly, given the Jacobian Derivative $\dot{J}(q)$ derived using the method presented from the paper by (Rhee, J. Y., & Lee, B., 2017) where the algorithm summarized ...
50 views

### Problems fixing frames to a 6 degrees freedom robot

Hello Robotics Stack Exchange. I am trying to put frames to this robot so I can make forward and inverse kinematics. However, when I use the DH parameters I do not get the same results as roboDK (a ...
161 views

### Hand eye calibration wrong result

I am trying to do hand eye calibration between the robotic arm end effector and Kinect V1. I am using handeye_calib_camodocal repository for calibration and trying to find $X$ by solving the equation: ...
31 views

### What should be the ideal ratio for link lengths ( L1/ L2) of a 2 link manipuator robot with revolute joints?

I am working on making a CAD model of a two link robotic manipulator, with link lengths around 15-20 cm. I am unable to figure how to set their mutual ratio and I want to know whether there is some ...
647 views

### URScript - how to get the actual TCP pose in tool space coordinate system?

I am writing a simple script for universal robots UR10 robotic arm. I am trying to find a way to to see if the tool current position is outside of a 3D bounding box. the 3D bounding box is defined ...
42 views

### How do I get the matrix for the mass?

Hi im currently studying for an introduction on robotics test and i have this task to calculate the kinetic and potential energy of the robot. The robot is an open chain and has one rotating joint as ...
58 views

### How to change endian for multi-byte I/O outputs?

When using the Yaskawa Smart Pendant SDK API (Java client), it is possible to set multi-byte I/O values via: ...
33 views

### What do I need to know about the dynamics of an industrial robot?

Apart from kinematics, what do i need to know about the dynamics and other things of a robot in order to calculate the angles of the joints for positions of the end effector exactly? that means: if i ...
82 views

I have developed a prototype of a CNC Machine with Arduino and Raspberry Pi for my first client, I now need to use industrial grade components, but I struggle with the hardware, I am confused. I just ...
32 views

### How To Do path planning To move the Robotic Arm in straight line in 3D where the arm is having base, Shoulder, Elbow & wrist? [closed]

Now the design we have has the 4 DOF (Base, Shoulder, Elbow, Wrist), there is no problem in moving the arm in a curved manner but the main problem arises in straight-line motion. I'm unable to fid=nd ...
55 views

### Model of two link rigid manipulator

I am working on parameter estimation of a rigid two-link manipulator as shown in the picture below. Unlike the cylindrical links shown in the above image, my robot has links of oval shape. So the ...
219 views

### Number of inverse kinematics closed form solutions for ABB IRB 140

I've read that 6 dof manipulators give eight closed form solutions, according to a paper. What is the number of iK solutions for the ABB IRB 140? (last three axes intersect but there is a offset ...
541 views

### Sensors in Collaborative Robots

I'm currently doing some research on collaborative robotics. One area of interest is the type of sensor(s) used in these kind of machines. I had a look at some robots by FANUC and Universal Robots ...
4k views

### What is the difference between a CNC router versus a CNC mill?

People at the RepRap 3d-printing project often mention CNC routers or CNC mills. Both kinds of machines almost always have a motorized spindle with stepper motors to move the spindle in the X, Y, and ...
950 views

### Kuka KR16L-2 robot simulation base and wrist rotation inconsistent with original robot

The issue is regarding simulation of Kuka robot KR16L6-2 in MATLAB using Robotics toolkit by Peter Corke. I wish to simulate the kinematic before passing a command to real robot for motion. I have ...
145 views

### Is there any fault in my kinematic diagram?

I was doing forward kinematic test on a 6 D.O.F anthropomorphic robotic manipulator. So I modeled my kinematic diagram by D-H notation. But I am confused. Because I have simplified some terms here. I ...
56 views

### What robotic skills can I develop when working as a robot operator? [closed]

I find myself very interested to work in the field of robotics though my background is not robotics, I had a degree in Physics, master 1 in Hydrodynamics and this year I have studied just one semester ...
410 views

### Position vs Image based visual servoing?

Can anyone explain Image based visual servoing for robotic arm through example? I can understand Position based based visual servoing like this, .... there is an object and estimating it 6D Pose ...
741 views

### Solving Inverse Kinematics for ABB IRB 120

I am working on an ABB IRB120 simulation using MATLAB Simulink. I use the decoupling method to solve the inverse kinematic of the robot. However, I have some questions related to the computation of ...
27 views

### CMA Net - How to export all statistics ? (In Excel/XLS)

On the lower-right of the screen, there is an "Archive" button, from which I go to the dialog box/window where there are Delete, Delete all, Export and Load options, but there is no "Export All" ... ...
131 views

### Calculate the inertia matrix of complex robotic mechanism

Motor, irregular rigid body of Different materials Forming a single robotic. For example, Industrial robot, every geometric shape of the link is very complex. But we can find inertia matrix form CAD ...
98 views

### vision guided robotic arm always required 6d pose of object? [closed]

I have an object like attached in image. It is hanging vertical (its position may change but static object) and I want to grasp it using 6DOF Robotic arm. I am Using camera to detect object. I am ...
421 views

### Gravity compensation

I am just getting curious about this gravity compensation technique. If we could compensate the force generated by the gravity (by feeding in the exact amount of force into the opposite direction), ...
219 views

### How can I simulate a changing environment with non-rigid objects?

Many robot applications (actually - the most practical and appealing ones) include the robot's reaction to (and impact on) the evironment, e.g. due to stochastic nature of the environment (e.g. when ...
25 views

### Project suggestions

Thank you for any input in advance! Also I am not totally sure this is the right place for this question. If not then I apologize but couldn't think of a better place to post it. I am working on a ...
60 views

### Controlling the robot with joystick values [closed]

I struggling days with this problem : I have joystick values 0~FF for each axis. So the higher this value, the faster the axis moves. I am trying to find a way to control a robot with these values. ...
21k views

### What is the difference between a Robot and a Machine?

What is the difference between a Robot and a Machine? At what point does a machine begin to be called a robot? Is it at a certain level of complexity? Is it when it has software etc?. For instance: ...
342 views

### EGM setup. Not possible to open the UdpUc device

I am trying to set up EGM (Externally Guided Motion from ABB) for Position Guidance using C#. But when the code reaches EGMSetupUC it will always give the error: 41824: Not possible to open the ...
75 views

### Challenges involved in designing an Industrial Robotic Arm [closed]

I was wondering if any robotics engineers around would kindly, provide suggestions on the following: I was recently hired by a company that wants to implement a robotic solution in manufacturing ...
263 views

### Finding Joint speeds for each joint of a 6DOF arm (UR10) using the Inverse Jacobian

Background: I have access to a UR-10, 6DOF robotic arm through my school (I'm very new to robotics). I know the desired set of linear speeds that I want in the x,y, z-direction in terms of the end ...
189 views

### Creating linear end effector motion using joint speeds: Converting tool speed to joint speeds

Background Information: I'm new to robotics and my school currently has access to a 6DOF Universal Robot (UR-10). I'm programming it using its scripting language URscript and the arm has these two ...
656 views

### 6DOF serial robot (PUMA robot) dynamic model equations

I'm trying to find the most simplified (though accurate) calculations for the dynamic model of a standard 6DOF serial robot (PUMA robot). I found this great paper: https://www-cs.stanford.edu/group/...
36 views

### controlling industrial servo with pc

these days I'm learning Orocos patched with xenomai. Although I have found the ways to create a hard real-time control software, I didn't find any information on how I should use this to control the ...
678 views

### How do I get this transformation matrix?

I've just started taking a robotics course and I am having a little problem. I need to rotate the $O_i-1$ coordinate system into a position, where $X_i-1$ will be parallel with $X_i$. The ...
470 views

### Is there a way to determine which degrees of freedom are lost in a robot at a singularity position by looking at the jacobian?

For a 6DoF robot with all revolute joints the Jacobian is given by:  \mathbf{J} = \begin{bmatrix} \hat{z_0} \times (\vec{o_6}-\vec{o_0}) & \ldots & \hat{z_5} \times (\vec{o_6}-\vec{o_5})\\ \...
46 views

### how do i select light-weight 6dof robot?

I plan to do some scientific research, after modeling and path planning for the robot, The algorithm outputs the Joint control torque(or Joint variable), and then i want to input this result to the ...
442 views

### How do I model a simple robot arm as a plant?

How do I model a simple robot arm as a plant?. I know how to model motors but, I think, controlling individual motors may not be enough; and in order to control the the arm as a plant I need to model ...
714 views

### Robot Calibration using DH parameters

I'm new in robotics. My problem is the next one: I have a 6DOF robot manipulator and because the implementation was for real-time application my calculation time had to be really fast so that I used ...