# All Questions

32 questions
Filter by
Sorted by
Tagged with
20 views

### Depth images with undetectable outlines

I'm trying to capture depth images with a RGBD camera, but all of the images have undetectable outlines around objects: Is this expected from RGBD cameras or is mine a dud? It's an Astra Pro.
97 views

### estimate accuracy of (aruco) marker position tracking

I'm planning a concept for calibrating a robot model. For this purpose I want to use computer vision approaches. Since I'm not that experienced in that field I have some basic questions on the ...
57 views

### What is the relation between FOV, Focal Length and Sensor size in a Pin hole Camera Model?

I aim to recreate the camera parameters of my camera in the Unity rendering system, which has the following variables: 1) I tweaked the focal length and saw that the Field of View is changing (...
21 views

### Is it possible to calculate a homography matrix for any 2 views?

I've been experimenting with opencv to estimate the homography matrix between 2 images captured with my computer's webcam. I have noticed that when the 2 views are not very far apart (that's when I ...
57 views

### vision guided robotic arm always required 6d pose of object? [closed]

I have an object like attached in image. It is hanging vertical (its position may change but static object) and I want to grasp it using 6DOF Robotic arm. I am Using camera to detect object. I am ...
82 views

### Short range stereo vision

I am designing a stereo vision system for short depth range (15 cm to 35 cm) and I have some problems about baseline, focal length and depth range. My application is to scan an animal tissue (meat, ...
90 views

### robot Hand Eye Calibration problem

I am trying to understand the implementations and the relative performance of various classical and new Hand-eye calibration approaches. Note: The following discussion assumes implementations are in ...
74 views

Suppose I have a 240x180 camera with the following distortion co-efficients, $$k_1 = -0.138592767408$$ $$k_2=0.0933736664192$$ $$k_3=0.0$$ $$p_1=k_4=-0.000335586987532$$ $$p_2=k_5=0.000173720158228$$ ...
42 views

### Algorithm for orientation (pan/tilt) towards a moving point

Main Question: note: The code in this question is pseudo-code, I'm using Python, but my pseudo-code is a mix of Python and C++. I have a camera on the top of my robot's "head" which has pan and tilt ...
115 views

### Can you find object distance using camera pose

I have bounding boxes detected in RGB images, but no information about the camera's intrinsic properties. Using deep learning (preferably) can I find the distance to the object from the camera in real ...
125 views

### Smart camera image processing on embedded GPU vs. in the cloud

I'm working on a smart camera that does key point prediction (predicting locations of wrists, elbow, shoulder, ears, eyes, nose, etc.) for gesture recognition. Right now, the neural net is running on ...
261 views

### OpenCV get topdown view of planar pattern by using intrinsic and extrinsic from cameraCalibrate

Originally I have a image with a perfect circle grid, denoted as A I add some lens distortion and perspective transformation to it, and it becomes B In camera calibration, A would be my destination ...
397 views

### How to eliminate motion blur with realtime performance

I have a robotic system to develop, in first phase of the project I need to track an object. So I placed a geometrical marker on the object to estimate it's pose (rotation, translation). It all works ...
3k views

### normalized point coordinates in undistortPoints function

In undistortPoints function from OpenCV, the documentations says that http://docs.opencv.org/2.4/modules/imgproc/doc/geometric_transformations.html#undistortpoints where undistort() is an ...
571 views

### Correct Fish eye camera radial distortion and blurry stretch at the image edges

There are a lot of questions regarding this topic, but I am trying to get a more clear picture from these questions. I am trying to calibrate a fish eye camera and I am using OpenCV ...
300 views

### setup requirement of stereo camera

In the stereo camera system, two cameras are needed and should be mounted side by side. I see someone just glues two cameras to a wooden board. However one mobile phone manufacture claimed that the ...
51 views

### Is there a better way to deal with untextured regions in stereo matching

Texture is very helpful for stereo matching. However in real environment, untextured areas always exit. Consistent semi-global matching is proposed to deal with untextured regions. I start to read the ...
367 views

### Using Standard Digital camera for Computer Vision

For a University project I have to use computer vision to detect small drones within 40 feet. I know there exists a pixycam for this purpose, but I was not happy with it, when I used it for CV. I ...
118 views

### Can I use a FTC regulation phone to use the camera on multiple tasks?

PREFACE: THIS QUESTION REGARDS FTC ROBOTICS I am aware that a question similar to this exists on SE and I have looked at it, but the solutions provided did not solve my problem, and the nature of my ...
521 views

### Stereo camera vs. one camera for player detection & ball tracking in basketball scenes?

There are a number of similar questions such as Monocular vs. stereo computer vision robustness for object detection, but none that address my question specifically. My weekend project is to build a ...
5k views

### Difference between 3D Camera(using IR projection) and Stereo Camera?

I am currently busy with a final year project which requires me to track people walking through a doorway. I initially thought this may be possible using a normal camera and using some motion ...
2k views

### Perspective n Point - RPnP algorithm

I need to caculate the pose of a camera using an image of an artificial landmkark. For this porpouse I am trying to use the Perspective n Point approach so I can calculate it using the intrinsic ...
24 views

### Is the distortion introduced by a lens protector significant in practice?

I have a computer-vision application I made to localize a robot in a room; the software has been in use for a while and is working fine. When I calibrated the camera and got the intrinsics and lens ...
3k views

### Using an RGB + Depth Camera to locate X,Y,Z coordinates of a ball

I've recently been trying to use Gazebo to do some modelling for a couple tasks. I have a robot that's effectively able to locate a ball and get x,y coordinates in terms of pixels using a simple RGB ...
1k views

### Real-time video processing on video feed from a drone's camera

I am working on a project where I want to run some computer vision algorithms (e.g. face recognition) on the live video stream coming from a flying drone. There are many commercial drones out there ...
612 views

### Suggestion for a camera [closed]

Are there good low cost cameras that are frequently used in robotics? I am assuming there are cameras that are good fit for robotics ... Works well with OpenCV PC Windows support - USB2/USB3 (GigE, ...
93 views

### Conceptual problem regarding electronic shutters

I have been looking at CCD and CMOS sensors and cameras to decide which one to use in the process of automatic control of a printing process. By now I am getting the grips on almost all the essential ...
55 views

### Depth of view for a hypercatadioptric camera

I am trying to determine the depth of view for a hypercatadioptric camera (camera lens system and a hyperbolic mirror) based on 1. The following illustration seems pretty clear. For an image point \$...
2k views

### Low power computer for stereo vision

I would like to build a motorized robot with stereo vision that sends visual input to a PC over wifi for processing. A Raspberry Pi would have been perfect for the task if it would be possible to ...
16k views

### How can I interface my CMOS camera module to an Arduino? [closed]

I am totally new to the camera interface and usage in an Embedded project, and would like to use a CMOS vision sensor like this.This project further will be used to power a small robot with on-board ...