Is it possible to display in RViz the collision geometry tag (box, sphere, cylinder etc.) of an URDF link tag?
Originally posted by andrestoga on ROS Answers with karma: 188 on 2019-07-31
Post score: 1
1 Answer
$\begingroup$
$\endgroup$
Yes, if you add a RobotModel display in rviz and expand its options in the Displays panel, you should see a checkbox for "Collision Enabled". If you check it, you can see the collision models for your robot that were read from the URDF. A nice example of that can be found here.
Originally posted by adamconkey with karma: 642 on 2019-07-31
This answer was ACCEPTED on the original site
Post score: 1
