0
$\begingroup$

Rosanswers logo

Hi guys I am looking for at PID controller which is capable of understand the message type sensor_msgs/JointState. As far i can see those which are available uses a custom message type, but none which uses the sensor_msg/JointState .. Do any of you know one??

I've looked into some, and http://wiki.ros.org/pid and seems to be what I am looking with the exception of the message type being not the one i want.. Somebody who are able to convert it?


Originally posted by 215 on ROS Answers with karma: 156 on 2015-05-23

Post score: 0

$\endgroup$

2 Answers 2

0
$\begingroup$

Rosanswers logo

Wikipedia already provides pseudo code..


Originally posted by 215 with karma: 156 on 2015-05-24

This answer was ACCEPTED on the original site

Post score: 0

$\endgroup$
0
$\begingroup$

Rosanswers logo

I don't know of any open implementation, but if you can tolerate the added latency of one additional hop though a ros node, you can write a very simple forwarding node that subscribes to a sensor_msgs/JointState topic, and publishes to the ROS interface of whatever controller you have otherwise found suitable.


Originally posted by Adolfo Rodriguez T with karma: 3907 on 2015-05-25

This answer was NOT ACCEPTED on the original site

Post score: 1

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.