4
$\begingroup$

A screw is defined by a six dimensional vector of forces and torques. It can represent any spatial movement of a rigid body (as written here). But I don't get the following distinction between screw and wrench:

The force and torque vectors that arise in applying Newton's laws to a rigid body can be assembled into a screw called a wrench.

It seems to be some kind of contextualisation but in what way?

$\endgroup$
4
$\begingroup$

I will try to make it as simple as possible. Imagine you have a SCREW, when you WRENCH it, it TWIST forward or backward.

From your wiki link

The components of the screw define the Plücker coordinates of a line in space and the magnitudes of the vector along the line and moment about this line.

It means that any system can be described as those coordinate system is a screw. For example a normal screw has it axis and it pitch.

A WRENCH is one case of SCREW where the act (force or torque) have the axis and yield a movement (translation or rotation)

You can have a look at the slide of the Summer Screw Summer School for more detail.

$\endgroup$
2
  • $\begingroup$ I haven't considered a screw to be a coordinate system. My way of thinking was always, that the screw enables a lower dimensional representation of displacement. Could you please explain in more detail? $\endgroup$
    – Milla Well
    Jul 18 '14 at 15:58
  • $\begingroup$ What can be described in a system with an axis and the magnitudes vector along the axis is a SCREW. From the Summer Screw page 19 : a line l with a pitch h (a metric quantity) is a geometric element called a screw. A wrench is a system of forces (reduced at a point) with equivalent systems identified. $\endgroup$
    – Loan
    Jul 21 '14 at 15:37
1
$\begingroup$

Summarizing from Murray, Li, and Sastry (chapters 3 and 5) there are 3 related things:

  • Twist: An element of se(3) (which is a bit like the derivative of an element of SE(3), which is the set of translations + rotations)
  • Screw: A translation+rotation (i.e. and element of SE(3))
  • Wrench: Generalized force (combination of linear force and torque)
$\endgroup$
4
  • $\begingroup$ Thanks for the summary, that helps a lot! Could you please explain why it is possible to state a wrench as a combination of force and torque as well as a screw and a force magnitude? $\endgroup$
    – Milla Well
    Jul 18 '14 at 15:55
  • $\begingroup$ Sorry, can you restate your question? I don't quite understand. $\endgroup$
    – ryan0270
    Jul 18 '14 at 15:59
  • $\begingroup$ I refer to this paper: profs.sci.univr.it/~fiorini/corsi/robotica/icra2001notes.pdf page 28, where one can see that a wrench can either be expressed as a concatenation of force and moment or as a convolution of screw and force. For me it is still not clear, why this holds - but maybe this is no longer part of this thread $\endgroup$
    – Milla Well
    Jul 18 '14 at 16:25
  • $\begingroup$ Sorry, but without studying it in more detail I'm not sure exactly what that paper is saying. I think it is saying that, similar to 3D motion, a wrench can be described by defining a line of action and a scalar times a pitch (i.e. similar to a screw describing a 3D motion). $\endgroup$
    – ryan0270
    Jul 18 '14 at 18:42
0
$\begingroup$

I strongly recommend a patient lecture of the chapters related to rigid body kinematics and dynamics of the book by Goldstein: classical mechanics. It will clear all our doubts.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.