So I have an idea which would require the following:
1-4 servos 1 microcontroller some way of communicating with it via smartphone (bluetooth or wifi)
Ability to run for 14 days on a small power source 2-3AA or AAA battries.
I'm seeing a lot of boards run in the 200Ma range which makes using batteries look like a no go as this even with a 13000mAh pack will only last 65hrs or about 3 days or so.
If I were able to get into thee micro amp range this would be great or very low mA range. Servos should only have to run <1second about 2-3 times a day.
Looking for starter information on this.