Can anyone please tell me if the sensor output is 0 to +-10V, and I connect the sensor to a differential amplifier to get an output of 0 to 3.3V then what is the input voltage to the differential amplifier from -10v to +10v or (0 to 10 v or -10 to 0v)?

If I use -10 to 10 volts then the differential amplifier adds both the input voltages and gives +20V and with gain, we can adjust it to 0 to 3.3. But, if I use 0 to 10v or 0 to -10V then I get half voltage with the above set gain.

Can anyone please explain?
Thank you!


A differential amplifier amplifies the difference between the signals. If you had a differential amplifier that scales a ±10v differential signal to a 0 to 3.3v signal, it would expect that the maximum input would be a 20v difference between the terminals. That's why you need to apply a 20v signal to the input to get the output you want.

If you have a sensor that outputs from -10v to +10v then you would need to apply 10v to one side of your differential amplifier so that 0v from your sensor corresponds to 1.65v out, -10v is 0v and 10v is 3.3v


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.