When running commands for Rviz I am not getting any output on the terminal and Rviz gui is not loading. I am running Indigo.
Originally posted by tyberious on ROS Answers with karma: 1 on 2017-07-20
Post score: 0
Original comments
Comment by jayess on 2017-07-20:
Are you running roscore?
Comment by tyberious on 2017-07-20:
I am running roscore.
Comment by tyberious on 2017-07-20:
:~$ rosrun rviz rviz
Comment by jayess on 2017-07-20:
Run rosrun rqt_logger_level rqt_logger_level and play around with the different loggers and logger levels for rviz and see if that tells you anything.
Comment by tyberious on 2017-07-20:
Hey Jayess I am not seeing rviz listed when running rosrun rqt_logger_level rqt_logger_level
Comment by jayess on 2017-07-20:
The node name should be something along the lines of /rviz_1500579339612988311.
Comment by jayess on 2017-07-20:
How did you install ROS?
Comment by tyberious on 2017-07-20:
sudo apt install ros-indigo-desktop-full I dont have anything that looks like that /rviz_1500579339612988311
Comment by jayess on 2017-07-20:
And nothing gets output to the terminal when you run rosrun rviz rviz?
Comment by gvdhoorn on 2017-07-21:
As with all RViz questions: please tell us whether you're running Linux/ROS in a VM, which OS this is, whether you have drivers installed for your 3D hardware, etc, etc.
Please update your original question. Comments are not meant for that.